Factory Price Sta-Rite 1-1/2" Piston Assembly W/ O-Rings | 14819-0011

STA-RITE | 1½” PISTON ASSEMBLY W/ OringS | 14819-0011

part for model : 1 1/2″ 14821-0000 | 2″ 14826-0000

OPTIMUS # 4660-17 PENTAIR / STA-RITE # 14819-0011

GENERAL DESCRIPTION: THIS IS THE COMPLETE MAIN SHAFT WITH SPACERS, THE HANDLE AND TOP CAP ARE NOT INCLUDED

GENERAL INFO: THIS IS USED ON THE STA-RITE 1-1/2″ UNITROL PUSH PULL VALVE

MATERIAL: SHAFT: BRASS SPACERS: WHITE PLASTIC TOP CAP: BLACK PLASTIC (NOT INCLUDED WITH THIS ASSEMBLY) HANDLE: ALUMINUM (NOT INCLUDED WITH THIS ASSEMBLY) DIMENSIONS: LENGTH: 15-3/8″ (A) (NOT INCLUDING HANDLE) SHAFT DIAMETER: 1/2″ (B) SPACERS: TOTAL # 2 SPACERS INCLUDED DIAMETER: 1-5/8″ THICKNESS: 1/2″ FROM OUTSIDE TO OUTSIDE GROOVE: 1/4″ SPACING: (MEASURED ON CENTERLINE FROM FIRST SPACER WITH THE FIRST SPACER AT ZERO) 1ST 0 2ND 7-13/16″ SPACER OringS: (2) INCLUDED THESE ARE STRETCHED ON TO THE SPACERS SO THE DIMENSIONS SHOWN ARE FOR THE ORIGINAL OringS BEFORE THEY ARE STRETCHED OUTSIDE DIAMETER: 1-5/8″ INSIDE DIAMETER: 1-1/4″ HOLES IN SHAFT: (MEASURED ON CENTERLINE FROM THE HANDLE END OF THE SHAFT) HOLE: 1/8″ AT 1/4″ FROM END HOLE: 1/8″ AT 3/4″ FROM END ASSEMBLY INCLUDES: SHAFT WITH 2 SPACERS Oring FOR EACH SPACER (2 TOTAL) MARKINGS: THERE ARE NO MARKINGS TOP PLATE INFO INCLUDED? NOT INCLUDED OPTIMUS # 4651-04 PENTAIR / STA-RITE # 14821-0007 GENERAL DESCRIPTION: THIS IS THE TOP PLATE USED IN THE STA-RITE 1-1/2″ UNITROL PUSH PULL VALVE MATERIAL: BRASS SHAPE: ROUND WITH 3 HOLES AROUND THE EDGE EACH HOLE CENTERLINE IS 3/16″ FROM THE EDGE EACH HOLE CENTERLINE IS ABOUT 2-3/8″ FROM THE NEXT DIMENSIONS: OUTSIDE DIAMETER: 2-3/4″ (A) TOTAL HEIGHT: 1″ (B) CENTER HOLE DIAMETER: 1/2″ INCLUDES: TOP PLATE ONLY MARKINGS: “DOWN” “UP” AND “FILTER BACKWASH” ARE CAST INTO THE TOP

HANDLE INFO INCLUDED? NOT INCLUDED OPTIMUS # 4651-10 PENTAIR / STA-RITE # 14821-0005 GENERAL DESCRIPTION: THIS IS THE HANDLE USED IN THE STA-RITE UNITROL PUSH PULL VALVES MATERIAL: ALUMINUM SHAPE: LEVER STYLE THERE ARE 3 HOLES IN THE BODY OF THE HANDLE 2 ARE VERY CLOSE AT THE HANDLE, ONE IS NEAR THE CENTER DIMENSIONS: LENGTH: 8-1/2″ (A) WIDTH: 3-1/2″ HEIGHT: 3-1/2″ (B) INCLUDES: HANDLE ONLY MARKINGS: “SWIMQUIP 14821-5” CAST INTO THE HANDLE