Balboa/Vico Impeller, 2 Hp – Red Stripe | PPUL20IMP Best Seller

BALBOA/VICO | Impeller, 2 HP – RED STRIPE | PPUL20IMP

OPTIMUS # 5190-036
VICO/BALBOA # 1212218
OLD VICO # PPUL20IMP

************************************************
GENERAL DESCRIPTION:

CLOSED FACE GRAY IImpeller, 2 HP

THE INLET OPENING IS DOUBLE STEPPED

THE SHAFT SIDE OF THE IImpeller IS FLAT
THE INLET SIDE SLOPES SLIGHTLY FROM THE EDGE TO THE INLET

THIS HAS A STRIPE ON THE SHAFT TO IDENTIFY THE IImpeller

************************************************
MATERIAL:
GRAY PLASTIC

TYPE: CLOSED FACE

NUMBER OF VANES: 5

************************************************
DIMENSIONS:

OUTSIDE DIAMETER 4-7/16″ (A)

TOTAL LENGTH: 3-3/8″

OUTSIDE THICKNESS AT EDGE: 1/2″ (B)
INSIDE THICKNESS AT EDGE: 9/32″

SHAFT LENGTH: 1-7/8″
SHAFT DIAMETER: 11/16″

INLET OPENING OUTSIDE DIAMETER: 2″
INLET OPENING INSIDE DIAMETER: 1-1/2″
THE INLET OPENING IS BEVELED ON THE INSIDE

THE SECOND STEP BELOW THE INLET IS 2-3/8″ DIAMETER

INLET OPENING LENGTH: 3/4″ (TOTAL OF BOTH STEPS)
EACH STEP IS ABOUT 3/8″

************************************************
MARKINGS:

STRIPES ON SHAFT
STARTING FROM THE END THESE ARE:

RED

SPECIAL NOTE: CURRENT IImpellerS ARE BEING MADE WITH
NO STRIPES ON THE SHAFT